Gable Roof Calculator
Calculate gable roof area, rafter lengths, and material quantities from building span and pitch. Includes both slopes, waste, and overhang. Free, no signup.
Roof Area Calculator
Calculate actual roof surface area from plan dimensions and pitch
Interactive demoTry our real system in 30 seconds or less
The same takeoff workstation that's in the app. No sign-in needed.
Related Free tools
Free Roofing Calculator
Full roofing calculator - pitch, area, rafters, materials
Free Bird's Mouth Calculator
Seat cut and plumb cut angles with ⅓-depth check
Free Construction Calculator
Areas, timber lengths, and building materials
Free Quote Generator
Turn measurements into a professional quote
Free Quote Generator
Turn your measurements into a professional quote
Free Purchase Order Generator
Create supplier order forms from your calculations
Free Invoice Generator
Send professional invoices and get paid faster
Start free trial
Full quoting, takeoff, and job management
Gable roofs - did you know?
How a gable roof works
A gable roof has two slopes meeting at a central ridge. Each slope is a simple rectangle. Total roof area = 2 × (run ÷ cos(pitch°)) × building_length. At 35°, 4m run, 10m building: 2 × 4.88 × 10 = 97.6 m².
Gable vs hip - which costs less?
Gable roofs are simpler and cheaper: fewer rafters, no compound cuts, less waste (10% vs 15-20% for hips). Gable roofs also have better loft space. But they are less wind-resistant than hip roofs.
Rafter count for a gable roof
Rafters at 400mm centres: building_length ÷ 0.4 + 1 pairs. For 10m building: 26 pairs = 52 rafters. At 600mm centres: 18 pairs = 36 rafters. Add 2 for gable ladder overhangs.
Gable end area calculation
Gable triangle area = run × (run × tan(pitch°)) ÷ 2. At 4m run and 35°: 4 × (4 × 0.700) ÷ 2 = 5.6 m² per gable. Used for wall material and vent calculations.
Formulas used
Total roof area
area = 2 × (run ÷ cos(pitch°)) × length
Rafter length
rafter = run ÷ cos(pitch°)
Rafter pairs
pairs = ceil(length ÷ spacing) + 1
Gable end area
gable = run × run × tan(pitch°) ÷ 2
Frequently asked questions
How do I calculate gable roof area?
2 × (run ÷ cos(pitch°)) × building_length. At 35°, 4m run, 10m building: 2 × 4.88 × 10 = 97.6 m².
How many rafters for a gable roof?
At 400mm centres: length ÷ 0.4 + 1 pairs. 10m building = 26 pairs = 52 rafters. Add 2 for gable ladders.
Gable vs hip roof cost?
Gable is simpler: fewer rafters, no compound cuts, 10% waste vs 15-20% for hip. Gable is typically 20-30% cheaper.
Best free gable roof calculator?
One that handles both slopes, rafter counts, and material quantities. This tool does all, free.