Hip & Valley Converter
Convert hip and valley rafter lengths and angles between metric and imperial. Enter pitch and run in any system, get results in both. Free, no signup.
Rafter / Hip & Valley
Calculate rafter and hip/valley lengths from pitch and span
Plan-view distance from wall to ridge (one rafter)
Interactive demoTry our real system in 30 seconds or less
The same takeoff workstation that's in the app. No sign-in needed.
Related Free tools
Free Roofing Calculator
Full roofing calculator - pitch, area, rafters, materials
Free Bird's Mouth Calculator
Seat cut and plumb cut angles with ⅓-depth check
Free Construction Calculator
Areas, timber lengths, and building materials
Free Quote Generator
Turn measurements into a professional quote
Free Quote Generator
Turn your measurements into a professional quote
Free Purchase Order Generator
Create supplier order forms from your calculations
Free Invoice Generator
Send professional invoices and get paid faster
Start free trial
Full quoting, takeoff, and job management
Hip & valley conversion - did you know?
Hip length metric vs imperial
A 6.31m hip (35°, 4m run) = 20.70ft. Standard US lumber: 22ft would cover it with waste. UK: 6.6m or 7.2m C24.
Backing angle in degrees and ratio
Backing angle is always in degrees (it is a bevel, not a slope). At 35° pitch: 24.2° backing. Convert to percentage: tan(24.2°) × 100 = 44.9%.
Side cut as a bevel angle
Side cut = arctan(cos(pitch°) ÷ sin(45°)). At 35°: 49.2°. This is set on a circular saw bevel gauge. In Imperial: same degrees - angles are unit-independent.
Why angles don't need conversion
Angles in degrees are the same in metric and imperial. Only linear measurements (lengths) need conversion. A 49.2° cut is 49.2° whether you measure the timber in mm or inches.
Formulas used
Hip length (metric→imperial)
feet = metres × 3.281
Hip length (imperial→metric)
metres = feet × 0.3048
Backing angle (always degrees)
backing = arctan(sin(pitch°) ÷ sqrt(2))
Side cut (always degrees)
side_cut = arctan(cos(pitch°) ÷ sin(45°))
Frequently asked questions
Do I need to convert backing angles?
No - angles in degrees are the same in metric and imperial. Only convert lengths (m↔ft).
How long is a 6.31m hip in feet?
6.31 × 3.281 = 20.70ft. Order 22ft lumber to allow for cuts and waste.
Can I calculate hip lengths in imperial?
Yes - toggle to Imperial. Enter hip run in feet; get hip length in feet. Switch to Metric for metres.
Is there a free hip and valley converter?
Yes - this converter handles lengths and angles in both unit systems, free.