Metric measurements
Work in metres and square metres. Roof areas, lengths and pitches are captured once in the takeoff and reused everywhere after that.
For New Zealand roofers
Roofing quoting software for New Zealand roofers.
Measure the roof, calculate quantities, apply your own pricing, build the customer quote, then carry accepted work into material orders and invoices. One connected workflow built for measurement-driven roofing.
Metric measurementsLong-run and cut-to-length roofingNZD quoting with GSTYour own material and labour pricing
NZ roofing workflow
Roofing work in New Zealand is measured, then priced. Your software should work the same way.
Most NZ roofing jobs are quoted from real measurements: roof areas in square metres, ridges, hips, valleys, barges and flashings in linear metres, and cut-to-length sheeting for long-run profiles. QuoteCore+ starts at the measurement and keeps every downstream document connected to it.
Roof-specific detail
Record roof areas, ridges, hips, valleys, barges and flashings as separate measured items, not one lumped number, so quantities stay checkable.
Your own pricing
Build reusable pricing from your own material rates and labour. Your quotes price the way your business prices, in NZD.
GST on customer documents
Add GST at your rate to quotes, material orders and invoices. Customer documents come out clean and complete.
Cut-to-length materials
Ordered sheet lengths and custom lengths stay attached to the job, which matters for long-run and other metal profiles.
Site or office
Measure and quote from a phone or tablet on site, or from plans at the office. The same job data follows the work.
Long-run roofing changes the material maths.
A hip or valley roof is not priced by area alone. Diagonal cuts leave tapered offcuts, some reusable and some not, so the sheets you actually buy can differ sharply from a simple area figure with a flat waste percentage.
- Ordered lengths planned against the measured roof, not guessed
- Reusable offcuts identified before material is purchased
- Fewer surprise material shortfalls after the job is won
See the Offcut Optimiser feature
Connected workflow
Measure once. Quote, order and invoice from the same job.
The time sink in roofing quoting is not any single step. It is re-entering the same job information into notes, spreadsheets, a quote, an order and an invoice. QuoteCore+ keeps one job record and carries it through.
- 01
Measure
Digital takeoff from plans or site measurements, in metric.
- 02
Quantities
Areas, lengths and component counts calculated from the takeoff.
- 03
Pricing
Your material and labour rates, with waste and pricing rules you control.
- 04
Quote
A professional customer quote in NZD with GST applied at your rate.
- 05
Acceptance
The customer accepts or declines and you are notified.
- 06
Material order
Accepted work becomes an order with quantities and lengths carried over.
- 07
Invoice
Invoice from the same job record and track it through to payment.
New Zealand facts
What is true today, stated plainly.
A few things worth knowing before you look at pricing.
Quoting in NZD
Customer quotes, orders and invoices can be produced in NZD using your own rates. Currency is a display setting for your documents.
GST on documents
You can add GST, or any other tax, with its own percentage to customer documents.
Subscription billing in USD
QuoteCore+ subscriptions are billed in USD through the global pricing builder. The same plans and prices apply worldwide. See pricing.
One global product
The same app, demo and free tools serve every country. New Zealand roofers use the identical workflow and feature set.
Start wherever suits you
Two ways to start.
Book a free 20-minute call with Shaun to see the workflow against your own jobs, or create a free workspace and take it from there.
Book a free 20-minute call with Shaun
Show us how you quote long-run and measured roofing work and we will map the workflow to it. No obligation.
Book the callCreate a free workspace
Set up your workspace and start measuring, pricing and quoting in metric.
Create a free workspaceFAQ
Roofing quoting software NZ: common questions
Practical answers about how QuoteCore+ fits into real estimating, takeoff and quoting workflows.
Is QuoteCore+ suitable for New Zealand roofing businesses?
Yes. The workflow is measurement-driven and works in metric, which suits how NZ roofers measure and price. Roof areas, ridges, hips, valleys, barges and flashings are measured once and carried through the quote, material order and invoice instead of being re-typed into separate documents.
Can I quote in NZ dollars with GST?
Yes. Set NZD as your quote currency and add GST at your rate to customer quotes, orders and invoices. You use your own material and labour pricing. Subscription billing is in USD through the global pricing builder.
Does QuoteCore+ handle long-run roofing?
Yes. Long-run and other cut-to-length metal roofing is a core use case. Measured lengths feed the quote, and the Offcut Optimiser can suggest whole-roof cutting plans so purchased lengths and reusable offcuts are checked before the price is fixed.
How much does QuoteCore+ cost?
Subscription configurations are billed in USD and start from US$29 per month through the pricing builder.
Can I try it before paying?
Yes. Create a free workspace and start measuring, pricing and quoting, or book a free 20-minute call with Shaun to see the workflow walked through against your own jobs.
Is this different from the global QuoteCore+ product?
No. This is the same QuoteCore+ application, demo and free tools used worldwide. This page simply explains how the workflow fits New Zealand roofing businesses. One product, one login, one workflow.
Related
Keep exploring
Go deeper on the part of the workflow that matters most to you.
QuoteCore+
Quote NZ roofing work from the measurement up.
Measure, price with your own rates, quote in NZD with GST, then carry accepted work into orders and invoices without re-typing the job.